 |
Narrow Cross Register Line (CRL) with Gap at Top - Top of CRL is 7 mm above Length Register Mark (LRM). Position 1 |
 |
"Plain" tab, except for plate number, with offset plate seamline along top of pane. Position 2 |
 |
Wide CRL with Gap at the Top. Position 3 |
||
 |
Narrow Cross Register Line (CRL) with Gap at Top - Top of CRL is 8 mm above Length Register Mark (LRM). Position 4 |
 |
Narrow CRL with No Gap. Positions 5, 8, 9, 12, 13, 16, 17, 20, 29, 32, 33, 37, 40, 41 or 44 |
 |
Intaglio Black and Offset Red Triangles. Position 6 |
||
 |
Wide CRL with No Gap at either end of CRL. Positions 7, 11, 15, 19, 23, 27, 31, 35, 39 or 43 |
 |
Offset Red Triangle. Position 10 |
 |
Offset Blue and Yellow Triangles. Position 14 |
||
 |
Offset Black Triangle near top of tab. Position 18
|
 |
Top of "+" Register Mark in Lower Left corner of tab. Position 21 |
 |
"Plain" tab, except for plate number, with no offset plate
seamline along top or bottom of pane. Positions 22, 26 or 38 |
||
| Pos. 22 | |||||||
 |
Tip of "+" Register Mark in Lower Right corner of
pane. Position 24 |
|
Tip of "+" Register Mark in Upper Left corner of tab. Position 25 |
 |
Tip of "+" Register Mark in Upper Right corner of pane. Position 28 |
||
 |
Offset and Intaglio "+" Registration Mark. Position 30 |
 |
Five small solid color "CC1" squares in the tab. Position 34 |
 |
Offset Black Triangle near center of tab. Position 42 |
||
 |
Narrow CRL with bottom Gap. Smooth end on bottom of CRL. Position 45 |
|
"Plain" tab, except for plate number, with offset plate seamline along bottom edge of pane. Positions 46 |
 |
Wide CRL with Gap at the bottom. Position 47 |
||
 |
Narrow CRL with bottom Gap. Jagged end on bottom of CRL. Position 48 |
 |
Close-up of Position 45 with smooth end on CRL | ||||
 |
Close-up of Position 48 with jagged end on CRL | ||||||